redhat linux adsl撥號上網

/usr/sbin/adsl-setup

LOGIN NAME

Enter your Login Name (default root): ******** #此處為ADSL帳號

INTERFACE

Enter the Ethernet interface connected to the ADSL modem

For Solaris, this is likely to be something like /dev/hme0.

For Linux, it will be ethX, where 'X' is a number.

(default eth0): #選擇網卡設備.如果你的電腦就一個網卡.eth0

Do you want the link to come up on demand, or stay up continuously?

If you want it to come up on demand, enter the idle time in seconds

after which the link should be dropped. If you want the link to

stay up permanently, enter 'no' (two letters, lower-case.)

NOTE: Demand-activated links do not interact well with dynamic IP

addresses. You may have some problems with demand-activated links.

Enter the demand value (default no): #直接回車.默認方式即可

DNS

Please enter the IP address of your ISP's primary DNS server.

If your ISP claims that 'the server will provide dynamic DNS addresses',

enter 'server' (all lower-case) here.

If you just press enter, I will assume you know what you are

doing and not modify your DNS setup.

Enter the DNS information here: server #此處設置DNS.如果你不知道ISP的DNS.填寫server

PASSWORD

Please enter your Password: #ADSL帳號密碼

Please re-enter your Password: #重複密碼

USERCTRL

Please enter 'yes' (three letters, lower-case.) if you want to allow

normal user to start or stop DSL connection (default yes): #默認即可

FIREWALLING

Please choose the firewall rules to use. Note that these rules are

very basic. You are strongly encouraged to use a more sophisticated

firewall setup; however, these will provide basic security. If you

are running any servers on your machine, you must choose 'NONE' and

set up firewalling yourself. Otherwise, the firewall rules will deny

access to all standard servers like Web, e-mail, ftp, etc. If you

are using SSH, the rules will block outgoing SSH connections which

allocate a privileged source port.

The firewall choices are:

0 - NONE: This script will not set any firewall rules. You are responsible

for ensuring the security of your machine. You are STRONGLY

recommended to use some kind of firewall rules.

1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation

2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway

for a LAN

Choose a type of firewall (0-2): 0 #防火牆設置

Start this connection at boot time

Do you want to start this connection at boot time?

Please enter no or yes (default no): #按需設定

** Summary of what you entered **

Ethernet Interface: eth0

User name: ********

Activate-on-demand: No

DNS addresses: Supplied by ISP's server

Firewalling: NONE

User Control: yes

Accept these settings and adjust configuration files (y/n)? y

Adjusting /etc/sysconfig/network-scripts/ifcfg-ppp0

Adjusting /etc/ppp/chap-secrets and /etc/ppp/pap-secrets

(But first backing it up to /etc/ppp/chap-secrets.bak)

(But first backing it up to /etc/ppp/pap-secrets.bak)

Congratulations, it should be all set up!

Type '/sbin/ifup ppp0' to bring up your xDSL link and '/sbin/ifdown ppp0'

to bring it down.

Type '/sbin/adsl-status /etc/sysconfig/network-scripts/ifcfg-ppp0'

to see the link status.

redhat使用ADSL撥號上網命令：/usr/sbin/adsl-start

本文出自 「Xin23的歷程」 博客,請務必保留此出處http://xin23.blog.51cto.com/1827266/422820

Tags: linux system 系統