編寫hello.c程序,代碼如下：
#include <stdio.h>
int main()
{
int i;
for(i=0;i<6;i )
{
printf("i=%d\n",i);
printf("Hello,embedded linux\n");
}
return 0;
}
編譯hello.c
linux-dist$">stuyou@UBUNTU:/usr/local/src/uClinux-dist$ sudo arm-elf-gcc -elf2flt -o hello hello.c
生成hello,hello.gdb
掛載romfs
stuyou@UBUNTU:/usr/local/src/uClinux-dist/images$ mkdir romfs_dir
stuyou@UBUNTU:/usr/local/src/uClinux-dist/images$ sudo mount -o loop romfs.img romfs_dir
拷貝hello
stuyou@UBUNTU:/usr/local/src/uClinux-dist/images$ sudo cp ../hello ./romfs_dir
出錯
cp: cannot create regular file `romfs_dir/bin/hello': Read-only file system
複製根文件系統到一個新到目錄中
stuyou@UBUNTU:/usr/local/src/uClinux-dist/images$ sudo mkdir new_romfs
stuyou@UBUNTU:/usr/local/src/uClinux-dist/images$ sudo cp -r romfs_dir/* new_romfs
拷貝hello
stuyou@UBUNTU:/usr/local/src/uClinux-dist/images$ sudo cp ../hello new_romfs/bin
生成新的romfs映像
stuyou@UBUNTU:/usr/local/src/uClinux-dist/images$ sudo genromfs -f romfs_new.img -d new_romfs/
修改skyeye.conf,使之使用新的映像
#skyeye config file sample
arch:arm
cpu: arm7tdmi
mach: at91
mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000
mem_bank: map=M, type=RW, addr=0x01000000, size=0x00400000
mem_bank: map=M, type=R, addr=0x01400000, size=0x00400000, file=./romfs_new.img
mem_bank: map=M, type=RW, addr=0x02000000, size=0x00400000
mem_bank: map=M, type=RW, addr=0x02400000, size=0x00008000
mem_bank: map=M, type=RW, addr=0x04000000, size=0x00400000
mem_bank: map=I, type=RW, addr=0xf0000000, size=0x10000000
#set nic info
#net: type=cs8900a, base=0xfffa0000, size=0x20,int=16, mac=0:4:3:2:1:f, ethmod=tuntap, hostip=10.0.0.1
net: type=cs8900a, ethmod=tuntap, hostip=10.0.0.1
uart: mod = term
#dbct: state=on
在skyeye上啟動uClinux
stuyou@UBUNTU:/usr/local/src/uClinux-dist/images$ skyeye -c skyeye.conf -e linux
得到如下啟動信息：
Your elf file is little endian.
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x80605a0
ethmod num=1, mac addr=0:0:0:0:0:0, hostip=10.0.0.1
failed to setup_module (name:net, type:cs8900a)
tapif_init: icotl TUNSETIFF erroruart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm7100 mmu ops
Loaded ROM ./romfs_new.img
exec file "linux"'s format is elf32-little.
load section .init: addr = 0x01000000 size = 0x0000a000.
load section .text: addr = 0x0100a000 size = 0x000dccd0.
load section .data: addr = 0x010e8000 size = 0x00009ce4.
not load section .bss: addr = 0x010f1d00 size = 0x000220a0 .
not load section .debug_abbrev: addr = 0x00000000 size = 0x0003d30e .
not load section .debug_info: addr = 0x00000000 size = 0x0186c1ff .
not load section .debug_line: addr = 0x00000000 size = 0x00304551 .
not load section .debug_pubnames: addr = 0x00000000 size = 0x0000c30b .
not load section .debug_aranges: addr = 0x00000000 size = 0x00002438 .
call armul_InitSymTable,kernel filename is linux.
start addr is set to 0x01000000 by exec file.
Linux version 2.4.31-uc0 (root@UBUNTU) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #1 Thu May 13 15:02:46 CST 2010
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 15.82 BogoMIPS
Memory: 4MB = 4MB total
Memory: 2936KB available (883K code, 180K data, 40K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-15123FF [VIRTUAL 1400000-15123FF] (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: /etc/rc
Command: hostname GDB-armulator
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram0 /var
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: mkdir /var/empty
Command: cat /etc/motd
Welcome to
GDB/armulator support by
For further information check:
http://www.uclinux.org/
Execution Finished, Exiting
Sash command shell (version 1.1.1)
/>
切換到/bin目錄下
/> cd bin
/bin> ls
bcdm
boa
busybox
dhcpcd
expand
false
gdbserver
hello
ifconfig
inetd
init
login
mount
mtdm
ping
reboot
route
sh
telnetd
thdm
true
umount
看到了hello,執行
/bin> ./hello
i=0
Hello,embedded linux
i=1
Hello,embedded linux
i=2
Hello,embedded linux
i=3
Hello,embedded linux
i=4
Hello,embedded linux
i=5
Hello,embedded linux
/bin>
得到了正確到執行結果.
完畢！！
[火星人 ] 在uClinux文件系統中增加應用程序已經有557次圍觀
