歡迎您光臨本站 註冊首頁

messages中報Currently unreadable (pending) sectors 錯誤

←手機掃碼閱讀     火星人 @ 2014-03-03 , reply:0

messages中報Currently unreadable (pending) sectors 錯誤

messages中報Currently unreadable (pending) sectors 錯誤


在/var/log/message里看到如下提示:

Oct  8 05:23:51 centos55 smartd: Device: /dev/sda, 11 Currently unreadable (pending) sectors
Oct  8 05:53:51 centos55 smartd: Device: /dev/sda, 11 Currently unreadable (pending) sectors
Oct  8 06:23:51 centos55 smartd: Device: /dev/sda, 11 Currently unreadable (pending) sectors
Oct  8 06:53:51 centos55 smartd: Device: /dev/sda, 11 Currently unreadable (pending) sectors
Oct  8 07:23:51 centos55 smartd: Device: /dev/sda, 11 Currently unreadable (pending) sectors
Oct  8 07:53:51 centos55 smartd: Device: /dev/sda, 11 Currently unreadable (pending) sectors
Oct  8 08:23:51 centos55 smartd: Device: /dev/sda, 11 Currently unreadable (pending) sectors
Oct  8 08:53:51 centos55 smartd: Device: /dev/sda, 11 Currently unreadable (pending) sectors
Oct  8 09:23:52 centos55 smartd: Device: /dev/sda, 11 Currently unreadable (pending) sectors


很多,重啟smartd服務也沒用,配置沒動過,另一台伺服器就沒出現這種問題。
smartctl -H /dev/sda
smartctl version 5.38 Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
正常

smartctl 查看卻發現
smartctl -l error /dev/sda
smartctl version 5.38 Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
Warning: ATA error count 1784 inconsistent with error log pointer 1
ATA Error Count: 1784 (device log contains only the most recent five errors)
CR = Command Register
FR = Features Register
SC = Sector Count Register
SN = Sector Number Register
CL = Cylinder Low Register
CH = Cylinder High Register
DH = Device/Head Register
DC = Device Command Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1784 occurred at disk power-on lifetime: 5473 hours (228 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 41 00 57 0a 36 e0  Error: ABRT at LBA = 0x00360a57 = 3541591
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 57 0a 36 00 00  24d+19:39:05.392  READ DMA
  ec 00 00 00 00 00 00 00  24d+19:39:05.391  IDENTIFY DEVICE
  ef 03 42 00 00 00 00 00  24d+19:39:05.391  SET FEATURES
Error 1783 occurred at disk power-on lifetime: 5473 hours (228 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 41 00 57 0a 36 e0  Error: ABRT at LBA = 0x00360a57 = 3541591
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 57 0a 36 00 00  24d+19:39:01.421  READ DMA
  ec 00 00 00 00 00 00 00  24d+19:39:01.420  IDENTIFY DEVICE
  ef 03 42 00 00 00 00 00  24d+19:39:01.420  SET FEATURES
Error 1782 occurred at disk power-on lifetime: 5473 hours (228 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 41 00 57 0a 36 e0  Error: ABRT at LBA = 0x00360a57 = 3541591
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 57 0a 36 00 00  24d+19:38:57.450  READ DMA
  ec 00 00 00 00 00 00 00  24d+19:38:57.449  IDENTIFY DEVICE
  ef 03 42 00 00 00 00 00  24d+19:38:57.449  SET FEATURES
Error 1781 occurred at disk power-on lifetime: 5473 hours (228 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 41 00 57 0a 36 e0  Error: ABRT at LBA = 0x00360a57 = 3541591
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 57 0a 36 00 00  24d+19:38:53.479  READ DMA
  ec 00 00 00 00 00 00 00  24d+19:38:53.478  IDENTIFY DEVICE
  ef 03 42 00 00 00 00 00  24d+19:38:53.478  SET FEATURES
Error 1780 occurred at disk power-on lifetime: 5473 hours (228 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 41 00 57 0a 36 e0  Error: ABRT at LBA = 0x00360a57 = 3541591
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 57 0a 36 00 00  24d+19:38:49.509  READ DMA
  ec 00 00 00 00 00 00 00  24d+19:38:49.508  IDENTIFY DEVICE
  ef 03 42 00 00 00 00 00  24d+19:38:49.508  SET FEATURES


是不是我磁碟有問題?

[火星人 ] messages中報Currently unreadable (pending) sectors 錯誤已經有1412次圍觀

http://coctec.com/docs/service/show-post-1876.html