[root@ localhost Server]# rpm -ivh dhcp-3.0.5-13.el5.i386.rpm[root@ localhost Server]# rpm -ivh tftp-server-0.42-3.1.i386.rpm
4、配置SystemImager服務[root@localhost ~]# si_mkbootserver WARNING: this script may modify the following files: --> /etc/services --> /etc/inetd.conf --> /etc/xinetd.d/tftp And can restart inetd, xinetd or tftp servers. Do you wish to continue (y/[n])? y Ok, continuing... Checking for a tftp server... found. Checking if tftp server is H. Peter Anvin's tftp server... yup - right on! Checking for a running inetd... Not found. Checking for a running xinetd... 16428. Looking for update-inetd... not found. Backing up /etc/xinetd.d/tftp... Moving /etc/xinetd.d/tftp to /etc/xinetd.d/tftp.si_mkbootserver.bak0...done. Restaring xinetd ... Stopping xinetd: [ OK ] Starting xinetd: [ OK ] done. Looking for a tftp client... found. Checking for loopback interface... up. Does tftp server work... yes. Looking for a pxe daemon... which: no pxe in (/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin) not found.( 2)接下來,將要為BootServer配置Pxe,在詢問“pxelinux bootloader”路徑時,由於“/usr/lib/syslinux/pxelinux.0”路徑是syslinux安裝后的默認路徑,直接回車即可.
WARNING: your bootserver will be configured without a pxe daemon! (ignore this warning if you're using a recent distro) done. What is the path to the pxelinux bootloader [/usr/lib/syslinux/pxelinux.0]? #直接回車Copying /usr/lib/syslinux/pxelinux.0 to /var/lib/tftpboot/X86PC/UNDI/linux-install/linux.0 ... done. Linking /var/lib/tftpboot/pxelinux.bin to /var/lib/tftpboot/X86PC/UNDI/linux-install/linux.0 ...done. Copying /var/lib/tftpboot/X86PC/UNDI/linux-install/pxelinux.cfg to /var/lib/tftpboot/pxelinux.cfg...Ok, configuration complete.(3)在詢問你是否運行si_mkdhcpserver命令配置 DHCP Server,這裡直接輸入“y”回車.si_mkdhcpserver命令能夠幫助我們自動的完成對DHCP配置文件的修改,主要包含了你的域名、網段、子網掩碼和將要給客戶端分配的有效地址範圍等信息.
Once you're DHCP server is configured, you should be all set. Do you want to run si_mkdhcpserver to configure your DHCP server ([y]/n)? y 輸入“y” Welcome to the SystemImager "si_mkdhcpserver" command. This command will prepare this computer to be a DHCP server by creating a dhcpd.conf file for use with your ISC DHCP server (v2 or v3). If there is an existing file, it will be backed up with the .beforesystemimager extension. Continue? (y/[n]): y(4)程序使用了互動式的方式,詢問你使用的DHCP軟體包的版本、配置文件名稱、輸入域名、網段、子網掩碼、地址池等信息,根據實際環境填寫.
Trying to probe your DNS domain. Please wait... Type your response or hit <Enter> to accept [defaults]. If you don't have a response, such as no first or second DNS server, just hit <Enter> and none will be used. What is your DHCP daemon major version number (2 or 3)? [3]: What is the name of your DHCP daemon config file? [/etc/dhcpd.conf]: What is your domain name? [localdomain]: What is your network number? [192.168.1.0]: 172.16.0.0 What is your netmask? [255.255.0.0]: What is the starting IP address for your dhcp range? [172.16.0.1]: 172.16.0.11 What is the ending IP address for your dhcp range? [172.16.255.254]: 172.16.0.200 What is the IP address of your first DNS server? []: What is the IP address of your default gateway? [172.16.255.254]: 172.16.0.1 What is the IP address of your image server? [172.16.255.254]: 172.16.0.10 What is the IP address of your boot server? [172.16.255.254]: 172.16.0.10 What is the IP address of your log server? []: Use tmpfs staging on client? (If unsure, choose "n") [n]: Do you want to use Flamethrower (multicast) to install your clients? [n]: What... is the air-speed velocity of an unladen swallow? []: Wrong!!! (with a Monty Python(TM) accent...) Press <Enter> to continue...(5)下圖中列出了你剛剛填寫的信息,確認無誤后,輸入“y”完成配置.
Ahh, but seriously folks... Here are the values you have chosen: ####################################################################### ISC DHCP daemon version: 3 ISC DHCP daemon config file: /etc/dhcpd.conf DNS domain name: localdomain Network number: 172.16.0.0 Netmask: 255.255.0.0 Starting IP address for your DHCP range: 172.16.0.11 Ending IP address for your DHCP range: 172.16.0.200 First DNS server: Second DNS server: Third DNS server: Default gateway: [] Image server: 172.16.0.10 Boot server: 172.16.0.10 Log server: Log server port: Flamethrower directory port: Use tmpfs staging on client: n SSH files download URL: ####################################################################### Are you satisfied? (y/[n]): y( 6)開始創建DHCP服務的配置文件,並提示使用si_mkdhcpserver命令修改該配置文件.輸入“y”重新啟動DHCP服務,至此,DHCP服務, pxe服務配置完成.
The dhcp server configuration file (/etc/dhcpd.conf) file has been created for you. Please verify it for accuracy. If this file does not look satisfactory, you can run this command again to re-create it: "si_mkdhcpserver" WARNING!: If you have multiple physical network interfaces, be sure to edit the init script that starts dhcpd to specify the interface that is connected to your DHCP clients. Here's an example: Change "/usr/sbin/dhcpd" to "/usr/sbin/dhcpd eth1". Depending on your distribution, you may be able to set this with the "INTERFACES" variable in "/etc/default/dhcp", "/etc/default/dhcp3-server", or similar, or in your dhcpd initialization script ("/etc/init.d/dhcpd", "/etc/init.d/dhcp3-server", or similar). Also, be sure to start or restart your dhcpd daemon. This can usually be done with a command like "/etc/init.d/dhcpd restart" or similar. Would you like me to restart your DHCP server software now? (y/[n]): y Starting dhcpd: [ok]( 7)如果鏡像伺服器中有多個鏡像的話,就要告知哪一個節點安裝哪一個鏡像.si_addclients為鏡像的安裝腳本創建符號鏈接.si_addclients改寫鏡像伺服器的/etc/hosts
[root@localhost ~]# si_addclients Welcome to the SystemImager "si_addclients" utility -------------------------------------------------------------------------------- This utility has 3 sections. "Section 1" will ask you for your hostname information. "Section 2" will allow you to create softlinks from each client hostname to your "master" script in the "/var/lib/systemimager/scripts" directory. Example: www297.sh -> web_server_image_v1.master "Section 3" will ask you for IP address information that will be combined with the hostname information provided in Section 1 to create entries in "/etc/hosts" for each of these same clients. New entries will be appended to the end of "/etc/hosts". If you specify new hostnames for existing IP addresses, those entries will be re-written in place to reflect the new host names. Continue? ([y]/n): y #輸入“y”,繼續.(8)在 si_addclients的第一個配置部分,需要指出自動安裝節點的主機名稱樣式.一個主機範圍的欄位和一個域名用來定義我們要自動安裝的節點的主機名;
si_addclients -- Section 1 (hostname information) -------------------------------------------------------------------------------- The next series of questions will be used to create a range of hostnames. You will be asked for your domain name, the base host name, a beginning number, and an ending number. For example, if you answer: domain name = systemimager.org host range = www7-www11,www20 Then the result will be a series of hostnames that looks like this: www7.systemimager.org www8.systemimager.org www9.systemimager.org www10.systemimager.org www11.systemimager.org www20.systemimager.org What is your domain name? []: vfast.com What is the hosts range that you want me to use? []: node11-node200 I will work with hostnames: node11-node200 in the domain: vfast.com Are you satisfied? (y/[n]): y(9)在第二個配置部分,將前一部分定義的節點映射到到鏡像;
si_addclients -- Section 2 (soft links to master script) -------------------------------------------------------------------------------- Would you like me to create soft links to a "master" script so that hosts: node11-node200 can be autoinstalled with one of the available images? ([y]/n): y Here is a list of available autoinstall scripts: vfast_backup Which script would you like these hosts to be installed with? [vfast_backup]: Your soft links have been created. Press <Enter> to continue...(10 )在第三個配置部分,si_addclients命令請求IP地址範圍,這個IP保存在/etc/hosts和/var/lib/systemimager/scripts/hosts文件中.當自動安裝客戶端啟動時,它會從鏡像伺服器中檢索後面的文件並應用它查找主機名.
si_addclients -- Section 3 (adding or modifying /etc/hosts entries) -------------------------------------------------------------------------------- Your target machines need to be able to determine their host names from their IP addresses, unless their host name is specified in a local.cfg file. The preferred method for doing this is with DNS. If you have a working DNS that has IP address to hostname resolution properly configured for your target machines, then answer "n" here. If you don't have a working DNS, or you want to override the information in DNS, then answer "y" here to add entries to the "/etc/hosts" file on your image server. After adding these entries, the /etc/hosts file will be copied to "/var/lib/systemimager/scripts" where it can be retrieved by your target machines. I will ask you for your clients' IP addresses one subnet at a time. Would you like me to continue? (y/[n]): y si_addclients -- Section 3 (adding or modifying /etc/hosts entries -- continued...) -------------------------------------------------------------------------------- Hostnames range is: node11-node200 What is the IPs address range (e.g. 10.0.0.1-10.0.0.100,10.0.0.101)? []: 172.16.0.11-172.16.0.200 I will work with IP addresses: 172.16.0.11-172.16.0.200 and hostnames: node11-node200 Are you satisfied? (y/[n]): y Use of uninitialized value in concatenation (.) or string at /usr/sbin/si_addclients line 552. These entries have been added to /etc/hosts, and /etc/hosts has been copied to /var/lib/systemimager/scripts for use by your auto-install clients. Press <Enter> to continue... si_addclients: successfully completed.(11)執行si_mkclientnetboot 來製作多台要克隆機器通過網路安裝的對應啟動介質:
[root@localhost ~]# si_mkclientnetboot --netboot --clients node11-node200 [netboot] using the kernel and initrd.img for architecture: i386 [netboot] using the flavor: standard [root@localhost ~]#(12)啟動systemimager-server-rsyncd服務,使用rsync服務克隆系統.將以下服務設置重啟自動啟動.
[root@localhost ~]# /etc/init.d/systemimager-server-rsyncd start Starting rsync daemon for systemimager: already running. [root@localhost ~]# chkconfig systemimager-server-rsyncd on [root@localhost ~]# chkconfig dhcpd on [root@localhost ~]# chkconfig xinetd on5、克隆操作系統
[火星人 ] 自動化安裝Linux系統之「SystemImager」(下)已經有610次圍觀