nginx+php+zend+mysql+PUREFTP+日誌

←手機掃碼閱讀火星人 @ 2014-03-04 , reply:0

如果大家轉載，請註明「我就要看看」網站 www.591cc.com
本人的QQ:105348557,歡迎大家互相交流！

編譯安裝軟體包
   源碼編譯安裝所需包(Source)
   升級OpenSSL及OpenSSH    tar xvf openssl-0.9.8h.tar.gz
      cd openssl-0.9.8h
      ./config --prefix=/usr/local/openssl
      make
      make test
      make install
      tar zxvf openssh-5.0p1.tar.gz
      cd openssh-5.0p1

      ./configure  \
      --prefix=/usr \
      --with-pam \
      --with-zlib \
      --sysconfdir=/etc/ssh \
      --with-ssl-dir=/usr/local/openssl \
      --with-md5-passwords
      make
      make install
vi /etc/ssh/ssh_config
禁用 SSH V1 協議:找到#Protocol 2,1改為：Protocol 2
   禁用伺服器端GSSAPI找到以下兩行，並將它們註釋：
   GSSAPIAuthentication yes
   GSSAPICleanupCredentials yes
   禁用 DNS 名稱解析
   找到：#UseDNS yeas改為：UseDNS no
   禁用客戶端 GSSAPI
   找到：GSSAPIAuthentication yes 將這行註釋掉。
   最後，確認修改正確后重新啟動 SSH 服務
   # service sshd restart
   # ssh -v 確認 OpenSSH 以及 OpenSSL 版本正確。
   # ssh -v
   OpenSSH_5.0p1, OpenSSL 0.9.8h 28 May 2008

make
tar jxvf make-3.81.tar.bz2
cd make-3.81
./configure --prefix=/usr/local/make
make
make install（這一步必須做，否則free的make版本不支持，版本太低）

perl
http://www.cpan.org/
tar xvf perl-5.10.0.tar.gz
cd perl-5.10.0
mv /usr/bin/perl /usr/bin/perl_old
./configure.gnu -de --prefix=/usr/local/perl -Dusedevel

如果中間出現缺少什麼。so
例如：ln -s /usr/lib/libldap.so.2 /usr/lib/libldap.so.199

make;make test;
make install
ln -s /usr/local/perl/bin/perl5.10.0 /usr/bin/perl

jpeg
http://www.ijg.org/
./configure --prefix=/usr/local/jpeg CFLAGS=' -O2 -I$(srcdir) -fPIC' --enable-shared --enable-static
make
mkdir -p /usr/local/jpeg/lib
mkdir -p /usr/local/jpeg/bin
mkdir -p /usr/local/jpeg/include
mkdir -p /usr/local/jpeg/man/man1
make install
make install-lib

zlib
官網http://www.gzip.org/zlib/
./configure
make
make install

libpng
http://www.libpng.org/pub/png/
./configure --prefix=/usr/local/libpng
make
make install

libxml

./configure --prefix=/usr/local/libxml
make
make install

freetype
http://ftp.twaren.net/Unix/NonGNU/freetype
tar xvf freetype-2.1.10.tar.bz2
cd freetype-2.1.10
./configure --prefix=/usr/local/freetype
/usr/local/make/bin/make
/usr/local/make/bin/make install

gd
http://www.libgd.org/Downloads

./configure --prefix=/usr/local/gd2 --with-jpeg=/usr/local/jpeg6 --with-png=/usr/local/libpng --with-freetype=/usr/local/freetype --with-zlib
make
make install

libiconv
tar xvf libiconv-1.9.2.tar.gz
cd libiconv-1.9.2
./configure --prefix=/usr/local/libiconv
make
make install

libmcrypt
./configure --prefix=/usr/local/libmcrypt
make
make install

mysql
tar xvf mysql-5.1.34.tar.gz
cd mysql-5.1.34

./configure --prefix=/usr/local/mysql \
--with-extra-charsets=all \
--enable-thread-safe-client \
--without-debug \
--with-mysqld-ldflags=-all-static \
--enable-assembler \
--with-big-tables \
--with-readline \
--with-ssl \
--with-embedded-server \
--enable-local-infile \
--with-innodb

make
make install

groupadd mysql
useradd mysql -g mysql -s /sbin/nologin

/usr/local/mysql/bin/mysql_install_db --user=mysql
./scripts/mysql_install_db  --user=mysql

chown -R root /usr/local/mysql
chown -R mysql /usr/local/mysql/var
chgrp -R mysql /usr/local/mysql

cp my.cnf /etc/my.cnf
cp /usr/local/mysql/share/mysql/my-medium.cnf /etc/my.cnf

編輯my.cnf
把skip-federated註釋掉
killall mysqld
/usr/local/mysql/bin/mysqld_safe --user=mysql &

ln -s /usr/local/mysql/include/mysql/* /usr/local/mysql/lib/mysql
ln -s /usr/local/mysql/lib/mysql/libmysqlclient* /usr/lib/

cp /usr/local/mysql/share/mysql/mysql.server /etc/init.d/mysql

chmod 755 /etc/init.d/mysql
chkconfig --level 345 mysql on
echo "/usr/local/mysql/lib/mysql" >> /etc/ld.so.conf
ldconfig
service mysql start

tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../

ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1

PHP其實並不用安裝

PHP
./configure --prefix=/usr/local/php \
--with-apxs2=/usr/local/apache/bin/apxs \
--with-mysql=/usr/local/mysql \
--disable-debug \
--with-libxml-dir=/usr/local/libxml \
--enable-mbstring \
--with-gd=/usr/local/gd \
--with-freetype-dir=/usr/local/freetype \
--with-jpeg-dir=/usr/local/jpeg \
--with-png-dir=/usr/local/libpng \
--with-zlib \
--with-ttf \
--enable-gd-native-ttf \
--without-iconv \
--enable-embedded-mysqli \
--with-mcrypt=/usr/local/libmcrypt

make
make test
make install
cp php.ini-dist /usr/local/php/lib/php.ini

php fastcgi
tar zxvf php-5.2.9.tar.gz
gzip -cd php-5.2.9-fpm-0.5.10.diff.gz | patch -d php-5.2.9 -p1
cd php-5.2.9/

./configure --prefix=/usr/local/webserver/php \
--with-config-file-path=/usr/local/webserver/php/etc \
-enable-discard-path --enable-safe-mode \
--enable-fastcgi \
--enable-force-cgi-redirect \
--enable-discard-path \
--with-mysql=/ftpdata/mysql \
--with-mysqli=/ftpdata/mysql/bin/mysql_config \
--disable-debug \
--with-libxml-dir=/usr/local/libxml2/ \
--enable-mbstring \
--with-gd=/usr/local/gd2 \
--with-freetype-dir=/usr/local/freetype \
--with-jpeg-dir=/usr/local/jpeg6 \
--with-png-dir=/usr/local/libpng \
--with-zlib \
--with-ttf \
--disable-rpath \
--enable-gd-native-ttf \
--with-mcrypt=/usr/local/libmcrypt \
--enable-bcmath  \
--enable-shmop  \
--enable-sysvsem \
--enable-inline-optimization \
--with-curl \
--with-curlwrappers \
--enable-mbregex \
--enable-fpm \
--with-mhash \
--enable-pcntl \
--enable-sockets \
--with-ldap \
--with-ldap-sasl

make ZEND_EXTRA_LIBS='-liconv'

make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../

tar zxvf memcache-2.2.5.tgz
一個高性能的分散式的內存對象緩存系統,通過在內存里維護一個統一的巨大的hash表,它能夠用來存儲各種格式的數據,包括圖像、視頻、文件以及資料庫檢索的結果等
http://danga.com/memcached/
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make test
make install
cd ../

tar jxvf eaccelerator-0.9.5.3.tar.bz2
優化和動態內容緩存,提高了性能php腳本的緩存性能,
http://eaccelerator.net/
cd eaccelerator-0.9.5.3/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make test
make install
cd ../

tar zxvf PDO_MYSQL-1.0.2.tgz
http://pecl.php.net/get

cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/mysql
make
make test
make install
cd ../

tar zxvf ImageMagick.tar.gz
ImageMagick (TM) 是一個免費的創建、編輯、合成圖片的軟體
http://www.imagemagick.com.cn/
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../

tar zxvf imagick-2.2.2.tgz
ImageMagick 是一個用於讀取、寫入和操作圖片的工具包和庫
http://www.imagemagick.org/
cd imagick-2.2.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make test
make install
cd ../

修改php.ini文件
　　手工修改：查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
　　修改為extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
　　並在此行后增加以下幾行，然後保存：
　　extension = "memcache.so"
　　extension = "pdo_mysql.so"
　　extension = "imagick.so"

　　再查找output_buffering = Off
　　修改為output_buffering = On

　　自動修改：若嫌手工修改麻煩，可執行以下shell命令，自動完成對php.ini文件的修改：

sed -i 's#extension_dir = "./"#extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"\nextension = "memcache.so"\nextension = "pdo_mysql.so"\nextension = "imagick.so"\n#' /usr/local/webserver/php/etc/php.ini
sed -i 's#output_buffering = Off#output_buffering = On#' /usr/local/webserver/php/etc/php.ini

　　

《解決方案》

6、配置eAccelerator加速PHP：

mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini

　　按shift+g鍵跳到配置文件的最末尾，加上以下配置信息：

引用

zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="128"
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="300"
eaccelerator.shm_prune_period="120"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"

　　修改配置文件：

vi /etc/sysctl.conf

　　輸入以下內容：

引用
kernel.shmmax = 134217728

　　然後執行以下命令使配置生效：

/sbin/sysctl -p

--------------------------------------------------------------------------------

創建www用戶和組，以及供兩個虛擬主機使用的目錄：

/usr/sbin/groupadd www
/usr/sbin/useradd -g www www
mkdir -p /var/www/blog
chmod +w /var/www//blog
chown -R www:www /var/www/blog
mkdir -p /var/www/www
chmod +w /var/www/www
chown -R www:www /var/www/www

創建php-fpm配置文件（php-fpm是為PHP打的一個FastCGI管理補丁，可以平滑變更php.ini配置而無需重啟php-cgi）：
　　在/usr/local/webserver/php/etc/目錄中創建php-fpm.conf文件：
cd /usr/local/webserver/php/etc/
cp php-fpm.conf php-fpm.confb
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf

　　輸入以下內容（如果您安裝 Nginx + PHP 用於程序調試，請將以下的

改為

，以便顯示PHP錯誤信息，否則，Nginx 會報狀態為500的空白錯誤頁）：

輸入以下內容（如果您安裝 Nginx + PHP 用於程序調試，請將以下的

改為

，以便顯示PHP錯誤信息，否則，Nginx 會報狀態為500的空白錯誤頁）：view plaincopy to clipboardprint?

   All relative paths in this config are relative to php's install prefix

   Pid file
   /usr/local/webserver/php/logs/php-fpm.pid

   Error log file
   /usr/local/webserver/php/logs/php-fpm.log

   Log level
   notice

   When this amount of php processes exited with SIGSEGV or SIGBUS ...
   10

   ... in a less than this interval of time, a graceful restart will be initiated.
   Useful to work around accidental curruptions in accelerator's shared memory.
   1m

   Time limit on waiting child's reaction on signals from master
   5s

   Set to 'no' to debug fpm
   yes

      Name of pool. Used in logs and stats.
      default

      Address to accept fastcgi requests on.
      Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'
      127.0.0.1:9000



         Set listen(2) backlog
         -1

         Set permissions for unix socket, if one used.
         In Linux read/write permissions must be set in order to allow connections from web server.
         Many BSD-derrived systems allow connections regardless of permissions.


         0666


      Additional php.ini defines, specific to this pool of workers.

         /usr/sbin/sendmail -t -i
         1


      Unix user of processes
         www

      Unix group of processes
         www

      Process manager settings


         Sets style of controling worker process count.
         Valid values are 'static' and 'apache-like'
         static

         Sets the limit on the number of simultaneous requests that will be served.
         Equivalent to Apache MaxClients directive.
         Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
         Used with any pm_style.
         128

         Settings group for 'apache-like' pm style


         Sets the number of server processes created on startup.
         Used only when 'apache-like' pm_style is selected
         20

         Sets the desired minimum number of idle server processes.
         Used only when 'apache-like' pm_style is selected
         5

         Sets the desired maximum number of idle server processes.
         Used only when 'apache-like' pm_style is selected
         35





      The timeout (in seconds) for serving a single request after which the worker process will be terminated
      Should be used when 'max_execution_time' ini option does not stop script execution for some reason
      '0s' means 'off'
      0s

      The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file
      '0s' means 'off'
      0s

      The log file for slow requests
      logs/slow.log

      Set open file desc rlimit
      51200

      Set max core size rlimit
      0

      Chroot to this directory at the start, absolute path


      Chdir to this directory at the start, absolute path


      Redirect workers' stdout and stderr into main error log.
      If not set, they will be redirected to /dev/null, according to FastCGI specs
      yes

      How much requests each process should execute before respawn.
      Useful to work around memory leaks in 3rd party libraries.
      For endless request processing please specify 0
      Equivalent to PHP_FCGI_MAX_REQUESTS
      500

      Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
      Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
      Makes sense only with AF_INET listening socket.
      127.0.0.1

      Pass environment variables like LD_LIBRARY_PATH
      All $VARIABLEs are taken from current environment

         $HOSTNAME
         /usr/local/bin:/usr/bin:/bin
         /tmp
         /tmp
         /tmp
         $OSTYPE
         $MACHTYPE
         2

用到查找替換
1, $ s/aa/kk/g    全局替換從第一行到最後一行
   :1, 10 s/aa/kk/g 全局替換從第一行到第10行
   s為搜索的意思

啟動php-cgi進程，監聽127.0.0.1的9000埠，進程數為200（如果伺服器內存小於3GB，可以只開啟64個進程），用戶為www：

ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start
註：/usr/local/webserver/php/sbin/php-fpm還有其他參數，包括：start|stop|quit|restart|reload|logrotate，修改php.ini后不重啟php-cgi，重新載入配置文件使用reload。

--------------------------------------------------------------------------------

三、安裝Nginx 0.7.54
1、安裝Nginx所需的pcre庫：

tar zxvf pcre-7.8.tar.gz
cd pcre-7.8/
./configure
make && make install
cd ../

2、安裝Nginx

tar zxvf nginx-0.7.54.tar.gz
cd nginx-0.7.54/
./configure --user=ftp --group=ftp --prefix=/usr/local/nginx --with-http_stub_status_module --with-http_ssl_module --with-http_realip_module --with-http_addition_module --with-http_sub_module --with-http_dav_module --with-http_flv_module --with-openssl=/home/zhy1899/nginx/openssl-0.9.8k

make && make install
cd ../

3、創建Nginx日誌目錄

mkdir -p /var/nginx/logs
chmod +w /var/nginx/logs
chown -R www:www /var/nginx/logs

4、創建Nginx配置文件
　　①、在/usr/local/nginx/conf/目錄中創建nginx.conf文件：
cd /usr/local/nginx/conf/
cp nginx.conf nginx.confb
rm -f /usr/local/nginx/conf/nginx.conf
vi /usr/local/nginx/conf/nginx.conf
輸入以下內容：

引用
user  www www;

worker_processes 8;

error_log  /var/nginx/logs/nginx_error.log  crit;

pid       /usr/local/nginx/nginx.pid;

#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 51200;

events
{
   use epoll;
   worker_connections 51200;
}

http
{
   include    mime.types;
   default_type  application/octet-stream;

   #charset  gb2312;

   server_names_hash_bucket_size 128;
   client_header_buffer_size 32k;
   large_client_header_buffers 4 32k;
   client_max_body_size 8m;

   sendfile on;
   tcp_nopush    on;

   keepalive_timeout 60;

   tcp_nodelay on;

   fastcgi_connect_timeout 300;
   fastcgi_send_timeout 300;
   fastcgi_read_timeout 300;
   fastcgi_buffer_size 64k;
   fastcgi_buffers 4 64k;
   fastcgi_busy_buffers_size 128k;
   fastcgi_temp_file_write_size 128k;

   gzip on;
   gzip_min_length  1k;
   gzip_buffers    4 16k;
   gzip_http_version 1.0;
   gzip_comp_level 2;
   gzip_types    text/plain application/x-javascript text/css application/xml;
   gzip_vary on;

   #limit_zone  crawler  $binary_remote_addr  10m;

   server
   {
   listen    80;
   server_name  192.168.6.253;
   index index.html index.htm index.php;
   root  /var/www/blog;

   #limit_conn crawler  20;

   location ~ .*\.(php|php5)?$
   {
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
   }

   location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
   {
      expires    30d;
   }

   location ~ .*\.(js|css)?$
   {
      expires    1h;
   }

   log_format  access  '$remote_addr - $remote_user [$time_local] "$request" '
               '$status $body_bytes_sent "$http_referer" '
               '"$http_user_agent" $http_x_forwarded_for';
   access_log  /var/nginx/logs/access.log  access;
      }

   server
   {
   listen    81;
   server_name  192.168.6.253;
   index index.html index.htm index.php;
   root  /var/www/www;

本人的QQ:105348557,歡迎大家互相交流！

[ 本帖最後由 zhy1899 於 2009-9-23 09:21 編輯 ]

《解決方案》

location ~ .*\.(php|php5)?$
   {
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
   }

   log_format  wwwlogs  '$remote_addr - $remote_user [$time_local] "$request" '
               '$status $body_bytes_sent "$http_referer" '
               '"$http_user_agent" $http_x_forwarded_for';
   access_log  /var/nginx/logs/wwwlogs.log  wwwlogs;
   }

   server
   {
   listen  82;
   server_name  192.168.6.253;

   location / {
   stub_status on;
   access_log off;
   }
   }
}

②、在/usr/local/nginx/conf/目錄中創建fcgi.conf文件：

vi /usr/local/nginx/conf/fcgi.conf

　　輸入以下內容：

引用
fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE nginx;

fastcgi_param  QUERY_STRING    $query_string;
fastcgi_param  REQUEST_METHOD    $request_method;
fastcgi_param  CONTENT_TYPE    $content_type;
fastcgi_param  CONTENT_LENGTH    $content_length;

fastcgi_param  SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param  SCRIPT_NAME       $fastcgi_script_name;
fastcgi_param  REQUEST_URI       $request_uri;
fastcgi_param  DOCUMENT_URI    $document_uri;
fastcgi_param  DOCUMENT_ROOT    $document_root;
fastcgi_param  SERVER_PROTOCOL $server_protocol;

fastcgi_param  REMOTE_ADDR       $remote_addr;
fastcgi_param  REMOTE_PORT       $remote_port;
fastcgi_param  SERVER_ADDR       $server_addr;
fastcgi_param  SERVER_PORT       $server_port;
fastcgi_param  SERVER_NAME       $server_name;

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS 200;

5、啟動Nginx

ulimit -SHn 51200
/usr/local/nginx/sbin/nginx

ZendOptimizer]
tar zxvf ZendOptimizer-3.3.0a-linux-glibc21-i386.tar.gz
cd ZendOptimizer-3.3.0a-linux-glibc21-i386
./install.sh
文字圖形界面－同意安裝協議－選擇Zend安裝目錄－選擇php.ini所在目錄－不使用apache web server－installing－finished

四、配置開機自動啟動Nginx + PHP

vi /etc/rc.local

　　在末尾增加以下內容：

引用
ulimit -SHn 51200
/usr/local/webserver/php/sbin/php-fpm start
/usr/local/nginx/sbin/nginx

--------------------------------------------------------------------------------

　　五、優化Linux內核參數

vi /etc/sysctl.conf

　　在末尾增加以下內容：

引用
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
net.ipv4.ip_local_port_range = 5000 65000
使配置立即生效：
/sbin/sysctl -p

六、在不停止Nginx服務的情況下平滑變更Nginx配置
　　1、修改/usr/local/nginx/conf/nginx.conf配置文件后，請執行以下命令檢查配置文件是否正確：

/usr/local/nginx/sbin/nginx -t

　　如果屏幕顯示以下兩行信息，說明配置文件正確：
　　the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
　　the configuration file /usr/local/nginx/conf/nginx.conf was tested successfully

　　2、這時，輸入以下命令查看Nginx主進程號：

ps -ef | grep "nginx: master process" | grep -v "grep" | awk -F ' ' '{print $2}'

　　屏幕顯示的即為Nginx主進程號，例如：
　　6302
　　這時，執行以下命令即可使修改過的Nginx配置文件生效：

kill -HUP 6302

　　或者無需這麼麻煩，找到Nginx的Pid文件：

kill -HUP `cat /usr/local/nginx/nginx.pid`

七、編寫每天定時切割Nginx日誌的腳本
　　1、創建腳本/usr/local/nginx/sbin/cut_nginx_log.sh

vi /usr/local/nginx/sbin/cut_nginx_log.sh

　　輸入以下內容：

引用
#!/bin/bash
# This script run at 00:00

# The Nginx logs path
logs_path="/usr/local/nginx/logs/"

mkdir -p ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/
mv ${logs_path}access.log ${logs_path}$(date -d "yesterday" +"%Y")/$(date -d "yesterday" +"%m")/access_$(date -d "yesterday" +"%Y%m%d").log
kill -USR1 `cat /usr/local/nginx/nginx.pid`

　　2、設置crontab，每天凌晨00:00切割nginx訪問日誌

crontab -e

　　輸入以下內容：

引用
00 00 * * * /bin/bash  /usr/local/nginx/sbin/cut_nginx_log.sh

pureftp 安裝調試

(建立pureftp的配置文件目錄)
mkdir /etc/pureftpd

tar xvf pure-ftpd-1.0.21.tar.bz2
cd pure-ftpd-1.0.21

./configure --prefix=/usr/local/pureftpd  \
--with-mysql=/usr/local/mysql \
--with-quotas \
--with-cookie \
--with-virtualhosts \
--with-virtualroot \
--with-diraliases \
--with-sysquotas \
--with-ratios \
--with-ftpwho \
--with-altlog \
--with-paranoidmsg \
--with-shadow \
--with-welcomemsg  \
--with-throttling \
--with-uploadscript \
--with-pam \
--with-largefile \
--with-peruserlimits \
--without-bonjour \
--with-cork \
--with-sendfile \
--with-privsep \
--with-capabilities \
--with-language=simplified-chinese \

make
make install
cd configuration-file/
chmod u+x pure-config.pl
cp pure-config.pl /usr/local/pureftpd/sbin/
cp pure-ftpd.conf /etc/pureftpd/
從網上下載pureftpd_php_manage，如果找不到，單擊可以加我QQ，問我要，註明「龍族」
上傳到/var/www/blog/
編輯pureftp.config.php

設置$PUREFTP_CONFIG_FILE = '/etc/pure-ftpd/db/pureftpd.conf';
為 $PUREFTP_CONFIG_FILE = '/etc/pureftpd/pure-ftpd.conf';
設置$FTP_WHO = "/usr/local/sbin/pure-ftpwho";
為$FTP_WHO = "/usr/local/pureftpd/sbin/pure-ftpwho";

設置 $DefaultUid = "ftpd"; 為你要存放用戶的目錄的所有者的ID或者用戶名
      $DefaultGid = "ftpd"; 為你要存放用戶的目錄的組的GID或者組名

      這裡主要的主要的是，這個UID和GID必須為發布apache或者nginix的後台運行的擁有者
      我為這個問題查詢了2天2夜，自己琢磨出來的，例如上面我設置的是www賬號運行nginix

      我們這樣設置
      usermod -g ftp www
      這句話的意思是把WWW放到ftp組裡面去
      同時要這樣設置 chmod 775 /要設置的FTP目錄
      否則會出現建立賬號，需要手工建立目錄

      附mysql的配置文件
        DROP TABLE IF EXISTS ftpd;
   CREATE TABLE ftpd (
   User varchar(16) NOT NULL default '',
   status enum('0','1') NOT NULL default '0',
   Password varchar(64) NOT NULL default '',
   Uid varchar(11) NOT NULL default '-1',
   Gid varchar(11) NOT NULL default '-1',
   Dir varchar(128) NOT NULL default '',
   ULBandwidth smallint(5) NOT NULL default '0',
   DLBandwidth smallint(5) NOT NULL default '0',
   comment tinytext NOT NULL,
   ipaccess varchar(15) NOT NULL default '*',
   QuotaSize smallint(5) NOT NULL default '0',
   QuotaFiles int(11) NOT NULL default 0,
   PRIMARY KEY (User),
   UNIQUE KEY User (User)
   ) TYPE=MyISAM;

Tags: nginx php zend mysql PUREFTP 日誌

[火星人 ] nginx+php+zend+mysql+PUREFTP+日誌已經有616次圍觀

本文地址：http://coctec.com/docs/service/show-post-20607.html

nginx+php+zend+mysql+PUREFTP+日誌

熱門文章

最新文章